Event Report – Bendigo, July 2024

 On the 20th and 21st of July, the VMPRA held a pylon racing event the Bendigo Model Aircraft Club. Despite the threatening weather forecasts, we were fortunate that rain didn’t impact the weekend at all. Although, Saturday was both cold and very windy.

We decided to kick things off with the Quickie 500 class. Due to the harsh conditions, we managed to fly only four rounds throughout the whole weekend. The severe weather forced us to restrict flying to just one class on Saturday and postpone the others to Sunday.

Sunday started with a challenge of its own. We aimed for an early start at 9 o’clock, but the field was engulfed in fog that didn’t clear until 11. This delay significantly reduced our flying time. However, once the fog lifted, the conditions turned favourable, with minimal wind and a nice cloud cover, making it ideal for flying without the low Winter sun in our eyes.

We commenced with five rounds of F3T in these perfect conditions, followed by four F3D rounds in the afternoon. The event concluded around 3 o’clock with the presentation of awards and then we headed home.

A special thanks to Wendy Dean for managing the computer for Quickie and F3T and acting as the starter for F3D. Her help was invaluable and it was gratifying to have sufficient helps to man all the pylons throughout the weekend. Quickie class was particularly challenging in terms of getting enough helpers, but in the end, we managed well.

Looking ahead, our next race is scheduled for August 17th and 18th in Kahuna. We’re excited and look forward to seeing everyone there!


Results

These are the placing for this race weekend plus the fastest time. For all the results, see the “Result” button below.

Class – FA1

Places:
1st Brian Steele
2nd Tom Wetherill
3rd Tom Allen

Fastest Time (Red Box): 63.23 Andrew Davies.
No. of competitors: 6

Class – F3T

Places:
1st Andrew Davies
2nd Brian Steele
3rd John Schmidli

Fastest Time (Red Box): 66.74 Andrew Davies.
No. of competitors: 7

Class – Q500

Places:
1st Tom Wetherill
2nd Tom Allen
3rd Jim Orenshaw

Fastest Time (Red Box): 97.02.07 Tom Wetheril
No. of competitors: 7

Season Championship

FA1

The top two places remain the same with Tom Wetherill moving u into third place displacing Anthony Thurgood down into 4th.

1st – Andrew Davies
2nd – Brian Steele
3rd – Tom Wetherill

F3T

No change in the top three positions for this class also……..again. Only a point between Andrew and Brian though.

1st – Brian Steele
2nd – Andrew Davies
3rd – Jim Orenshaw

Q500

The top two places remain the same with Eddie Rich moving u into third place displacing Tony Eichstadt down into 4th.

1st – Jim Orenshaw
2nd – John Schmidli
3rd – Eddie Rich

Next Race Event – Cohuna 17th – 18tt August.

 

Report  – John Schmidli.
Photos – Tom Wetherill and John Schmidli

Please note: We are looking for someone to write event reports regularly. Also, it would be wonderful to have someone photograph these events. This site has a vast readership and is important and valuable to pylon racing in Victoria, Australia and Worldwide.

The written content in this post is accurate to the best of my/our knowledge at the time of publishing. It is written from my/our perspective and reflects how I/we have experienced this event. Photos published as feature images are selected purely for their quality, general interest or topicality. When time permits, they are chosen from a pool of photos taken by myself and others. If a perspective is not being represented, I am more than happy to publish any written content or photos supplied to me, provided it is fair and reasonable.

Quick Reference

Event Report – Bendigo 2018

Back on August 4th-5th, the VMPRA headed to Bendigo to go racing. We ended up with better numbers than we first thought would be in attendance and the weather was quite good. Thanks to the Bendigo Club for hosting this event and for providing a field that was in such great condition.

Photo Gallery >>>

Results

It was unfortunate that pylon #2 was not manned all weekend so no fastest time will be recorded for this event.

Class – FA1

Places:
1st Daniel Arapakis
2nd Andrew Davies
3rd Barry Murphy

No. of competitors: 9

Results

Class – F400

Places:
1st Jim Orenshaw
2nd Andrew Davies
3rd Brian Steele

No. of competitors: 6

Class – Q500

Places:
1st Tom Allen
2nd Tom Wetherill
3rd John Schmidli

No. of competitors: 7

Check out the full results>>>

Season Championship

This is the start of the new 2018-2019 Championship Season after last season’s trophies were presented at the AGM at Bendigo.

The 2017-2018 Champions Jim Orenshaw (Q500), Leigh Hocken (FA1) & Brian Steele (F400).

 

 

 

 

 

 

Check Out Season Championship >>>

Next Race

The next event is the VIC State Championships being held at Cohuna on September 8th – 9th. This will also be a selection event for the 2019 F3D world championships Australian team.

Check Out Complete Calendar >>>

Event Report and Photos  – John Schmidli

The written content in this post is accurate to the best of my/our knowledge at the time of publishing. It is written from my/our perspective and reflects how I/we have experienced this event.

Photos published as feature images are selected purely for their quality, general interest or topicality. They are chosen from a pool of photos taken by myself and others when time permits.

If a perspective is not being represented, I am more than happy to publish any written content or photos that are supplied to me provided it is fair and reasonable.

Quick Reference

Event Results
Photos
Season Championship
Event Calendar

Bendigo 2016 – Event Report

Each year in July, the VMPRA head off to Bendigo, a regional city situated in the gold fields of central Victoria. It is also the start of the new season championship and we hold our annual general meeting at this event each year. Traditionally, this generally being in the middle of Winter, we can have some pretty cold and wet weather. Luckily, this year we were blessed with quite good conditions and Sunday felt positively Spring-like.
Hot Stuff Model Fuels
As we gathered out at the Marong Model Airfield, conditions were a little foggy but this soon cleared and test flights were carried out. The challenge for the weekend came when setting up the pylon course and in particular the #1 pylon cage. Both the trailer and car towing it dropped into a particularly soft patch of earth as there had been quite an amount of recent rain. Next Tom Allen’s 4-wheel drive ended up stuck while trying to extract the car and trailer. It took another 4-wheel drive of James Hurley’s and some harder ground to start extracting all the vehicles and the cage. As a result, it was just before midday before racing got underway.

First up was Formula 400 with the aim to run only 3 rounds due to the very late start.
Next up was Quickie 500 to also fly 3 rounds. As this class has a relatively easy and quick turn-around time (with only 6 competitors), we refueled out on the line. 3 rounds were quickly completed and we had lunch.

After the late lunch it was time for FA1 (F3D) to race. There were unusually low numbers with only 4 competing so the races where over quickly but model prep/turn-around was slow. Even still, 4 rounds where completed before the end of racing for the day.

During the day, I took the opportunity to test out Facebook Live to film and televise a Q500 and FA1 race. It worked quite well with some well known names from around the world of pylon racing, coming online and viewing the video live. You should be able to view these from the VMPRA facebook page.

In the evening a group of us went off to the Marong pub for dinner. For the size of the town of Marong, the pub is excellent. After dinner, we headed back to the Marong caravan park for our AGM and general meeting. The main change to come from the meeting was James Hurley being elected as our new President of VMPRA taking up the vacancy left by Glenn Matthews after many years as president. I know all the members will join me in thanking Glenn for all his hard work in the past, of which we are only now really starting to get a real appreciation of what he has been doing and congratulating and supporting James in taking up this position.

With Saturday being a rather grey, cold and threatening day, It was a real pleasure to come out to the field on the Sunday morning to sunny still conditions which continued all day. It became warm enough for a few of us to end up stripped down to t-shirts.

Test flying was supervised by Toni Axon in line with our new safety requirement as discussed at the general meeting the night before (these will be published and communicated before the next event).

Racing for the day was the same order as Saturday with F400 and then Q500 doing 5 rounds each with Q500 gaining another competitor in local, Shaun Powers. It was good to see him there having raced with us 2 years prior. FA1 started fairly late and only ended up flying 7 rounds for the weekend whereas F400 and Q500 flew 8.

With this event being one of the 1st with Glenn & Nerida being way, it was good that we had people chipping in to help run the event. In all it went fairly well with only one glitch with the new laptop which had the old version of the timing program loaded, so we had to manually drop the extra round. This will all be sorted for future events.

Check out the event photo gallery>>>

Results

Class – FA1

Places:
1st Brian Steele
2nd Andrew Davies
3rd Leigh Hocken

Fastest Time: 59.75 – Leigh Hocken
No. of competitors: 4

Class – F400

Places:
1st Andrew Davies
2nd Jim Orenshaw
3rd Gary Davidson

Fastest Time: 63.93 – Andrew Davies
No. of competitors: 6

Class – Q500

Places:
1st Tom Allen
2nd John Schmidli
3rd Jim Orenshaw

Fastest Time: 95.21 – Jim Orenshaw
No. of competitors: 7

Check out the full results>>>

Season Championship

Below is the 2015-2016 Season Championship for FA1 F400 and Q500. Congratulations Daniel, Brian and Jim. It is quite an effort to string together good performances, event after event to be in the position to win the season championship.

 

 

 

 

 

 

 

 

Now we have already started the 2016-2017 season championship so let’s see who can get to the top this year. There is nothing like a challenge to made us lift our performance.

Season Championship after 1 event.

FA1

1st – Brian Steele
2nd – Andrew Davies
3rd – Leigh Hocken

F400

1st – Andrew Davies
2nd – Jim Orenshaw
3rd – Gary Davidson

Q500

1st – Tom Allen
2nd – John Schmidli
3rd – Jim Orenhaw

Check Out Season Championship >>>

Season Fastest Time

We have reset the fastest times with the start of a new championship year. A huge congratulation goes out to Leigh Hocken for taking out the fastest times for last season in both FA1 and F400 and Daniel Arapakis for taking it out for Q500.

 

Next Race

The next event for VMPRA is a Q500 and Sports/Scanner race down at Crib Point on August 28. The race we had there earlier in the year was great with a lot of new comers to pylon competing. This one is really worth getting involved with. It is also part of the season championship for Q500.

 

 

 

 

 

 

 

 

 

 

 

 

 

Check Out Complete Calendar >>>

Event Report and Photographs – John Schmidli

The written content in this post is accurate to the best of my/our knowledge at the time of publishing. It is written from my/our perspective and reflects how I/we have experienced this event.
Photos published as feature images are selected purely for their quality, general interest or topicality. They are chosen from a pool of photos taken by myself and others when time permits.
If a perspective is not being represented, I am more than happy to publish any written content or photos that are supplied to me provided it is fair and reasonable.

Quick Reference

Event Result
Photo Gallery
Season Championship
Event Calendar

Hot Stuff Model Fuels